Common Silicone Rubber for Molding and Extrusion
Product name : Common Silicone Rubber for Molding and Extrusion
Model No. : MS-7125/7180
Products Category: > Solid Silicone > Silicone Rubber
Common Silicone Rubber for Molding and Extrusion
Applications:
● Keypads, sealing rings and sealing gaskets.
Technical indexes:
Properties | Product Data | Test Method | |||||||
NE-7125 | NE-7130 | NE-7140 | NE-7150 | NE-7160 | NE-7170 | NE-7180 | NE-7190 | ||
Appearance | Milk-white, light yellow, no obvious extraneous matter. | Visual Inspection | |||||||
Density, g/cm3 | 1.05~1.10 | 1.07~1.11 | 1.10~1.14 | 1.13~1.17 | 1.16~1.20 | 1.19~1.23 | 1.20~1.24 | 1.21~1.25 | ASTM D792 |
Hardness, Shore A | 25±2 | 30±2 | 40±2 | 50±2 | 60±2 | 70±2 | 80±2 | 86±2 | ASTM D2240 |
Tensile Strength, MPa ≥ | 3.5 | 6.0 | 6.5 | 7.5 | 7.0 | 4.0 | ASTM D412 | ||
Elongation at Break, % ≥ | 700 | 500 | 420 | 320 | 280 | 200 | 150 | 80 | |
Tension Set, % ≤ | 8 | 7 | 8 | 7 | 6 | ||||
Tear Strength, Die C kN/m ≥ | 10 | 15 | 16 | 18 | 17 | 16 | 10 | ASTM D624 | |
Compression Set, 180℃*22h ≤ | / | 50 | 30 | ASTM D395 | |||||
Resilience, % ≥ | / | 60 | 50 | 45 | 40 | / | |||
First-order linear shrinkage ,% | 3.6~4.2 | 3.4~3.9 | 3.3~3.8 | 3.2~3.7 | 3.1~3.6 | 2.9~3.5 | 2.8~3.4 | 2.7~3.4 | / |
Typical Data:
●Physical data in the above table is for reference only.
●Vulcanization condition: 175℃* 5Min.
●Ratio of curing agent liquid 2,5-Dimethyl-2,5-di (tert- butylperoxy) hexane: 0.65%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can’t guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Send Inquiry :
Related Products :
MS-631/681
Food Contact Silicone Rubber for Molding
MS-10/9320
Ultra-low-hardness Silicone Rubber
MS-0130/0980
Platinum Curing Silicone Rubber
MS-G121/G172
High Temperature Resistant Silicone Rubber
MS-1440/1470
Antistatic Silicone Rubber
Products Category
Contact Us
Name: william
Tel: +8618002889642
Mobile: +8618002889642
E-mail: jay@liquidsilicone.net
Add: shenzhen, guangdong
Whatsapp: +8618002889642
Skype: wsrubber
Wechat: worldstrong
QQ: 407139139