Fire Resistant Silicone Rubber
Product name : Fire Resistant Silicone Rubber
Products Category: > Solid Silicone > Flame Retardant Silicone Rubber
Fire Resistant Silicone Rubber
Applications:
●They are applicable to manufacturing of electronic and electric products with flame retardant and insulativity, such as flame retardant gaskets, flame retardant seal rings and wire sheaths for cold cathode fluorescent lamps.
Technical indexes:
Properties | Product Data | Test Method | |||||
NE-Z130 | NE-Z140 | NE-Z150 | NE-Z160 | NE-Z170 | NE-Z180 | ||
Appearance | White, no obvious extraneous matter. | Visual Inspection | |||||
Density, g/cm3 | 1.32~1.38 | 1.37~1.43 | 1.40~1.46 | 1.42~1.48 | 1.45~1.51 | 1.47~1.53 | ASTM D792 |
Hardness, Shore A | 32±2 | 40±3 | 50±3 | 60±3 | 70±3 | 78±3 | ASTM D2240 |
Tensile Strength, MPa ≥ | 3.5 | 4.5 | 6.0 | 5.5 | ASTM D412 | ||
Elongation at Break, % ≥ | 400 | 330 | 280 | 200 | 170 | ||
Tension Set, % ≤ | 6 | 8 | 7 | 6 | 5 | ||
Tear Strength, Die C kN/m ≥ | 12 | 13 | 15 | 13 | ASTM D624 | ||
Flame Retardancy , 3mm | FV-0 | IEC 60695-11-10 |
Properties | Product Data | Test Method | |||
NE-Z141 | NE-Z151 | NE-Z161 | NE-Z171 | ||
Appearance | White, no obvious extraneous matter. | Visual Inspection | |||
Density, g/cm3 | 1.34~1.40 | 1.38~1.44 | 1.40~1.46 | 1.44~1.50 | ASTM D792 |
Hardness, Shore A | 40±3 | 50±3 | 60±3 | 70±3 | ASTM D2240 |
Tensile Strength, MPa ≥ | 5.0 | 6.0 | 5.5 | ASTM D412 | |
Elongation at Break, % ≥ | 400 | 350 | 300 | 220 | |
Tension Set, % ≤ | 8 | 7 | 6 | ||
Tear Strength, Die C kN/m ≥ | 13 | 15 | 13 | ASTM D624 | |
Flame Retardancy , 3mm | FV-0 | IEC 60695-11-10 |
Properties | Product Data | Test Method | |||
NE-Z250 | NE-Z260 | NE-Z270 | NE-Z280 | ||
Appearance | White, no obvious extraneous matter. | Visual Inspection | |||
Density, g/cm3 | 1.40~1.46 | 1.42~1.48 | 1.45~1.51 | 1.47~1.53 | ASTM D792 |
Hardness, Shore A | 50±3 | 60±3 | 70±3 | 80±3 | ASTM D2240 |
Tensile Strength, MPa ≥ | 6.0 | 5.5 | 4.5 | ASTM D412 | |
Elongation at Break, % ≥ | 330 | 280 | 220 | 180 | |
Tension Set, % ≤ | 12 | 10 | |||
Tear Strength, Die C kN/m ≥ | 15 | 13 | ASTM D624 | ||
Flame Retardancy , 3mm | FV-0 | IEC 60695-11-10 |
Properties | Product Data | Test Method | ||||
NE-Z540 | NE-Z550 | NE-Z560 | NE-Z570 | NE-Z580 | ||
Appearance | White, no obvious extraneous matter. | Visual Inspection | ||||
Density, g/cm3 | 1.37~1.43 | 1.40~1.46 | 1.42~1.48 | 1.45~1.51 | 1.47~1.53 | ASTM D792 |
Hardness, Shore A | 40±3 | 50±3 | 60±3 | 70±3 | 78±3 | ASTM D2240 |
Tensile Strength, MPa ≥ | 4.0 | 5.0 | ASTM D412 | |||
Elongation at Break, % ≥ | 350 | 300 | 250 | 200 | 150 | |
Tension Set, % ≤ | 8 | 7 | 6 | 5 | ||
Tear Strength, Die C kN/m ≥ | 12 | 14 | 12 | ASTM D624 | ||
Flame Retardancy , 3mm | FV-0 | IEC 60695-11-10 |
●Vulcanization condition: 175℃* 5Min.
●Ratio of curing agent liquid 2,5-Dimethyl-2,5-di(tert-butylperoxy)hexane: 1.0%.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can't guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Send Inquiry :
Products Category
Contact Us
Name: william
Tel: +8618002889642
Mobile: +8618002889642
E-mail: jay@liquidsilicone.net
Add: shenzhen, guangdong
Whatsapp: +8618002889642
Skype: wsrubber
Wechat: worldstrong
QQ: 407139139