Platinum Curing Silicone Rubber
Product name : Platinum Curing Silicone Rubber
Model No. : MS-0130/0980
Products Category: > Solid Silicone > Silicone Rubber
Platinum Curing Silicone Rubber
Applications:
●NE-01 series with precipitated silica are used to manufacture molded food contact silicone rubber products.
●NE-09 series with fumed silica are applicable to molding and extrusion process, and used to manufacture food contact silicone rubber products and transparent silicone tubes.
Technical indexes:
Properties | Product Data | Test Method | |||||
NE-0130 | NE-0140 | NE-0150 | NE-0160 | NE-0170 | NE-0180 | ||
Appearance | Milk-white, translucent, no obvious extraneous matter. | Visual Inspection | |||||
Density, g/cm3 | 1.06~1.10 | 1.10~1.15 | 1.13~1.18 | 1.15~1.20 | 1.18~1.23 | 1.20~1.25 | ASTM D792 |
Hardness, Shore A | 30±3 | 40±3 | 50±3 | 60±3 | 70±3 | 80±3 | ASTM D2240 |
Tensile Strength, MPa ≥ | 7.0 | 7.5 | 8.5 | 8.0 | 7.0 | ASTM D412 | |
Elongation at Break, % ≥ | 600 | 500 | 400 | 300 | 200 | ||
Tear Strength, Die C kN/m ≥ | 15 | 19 | 20 | 18 | 15 | ASTM D624 | |
Resilience, % ≥ | 65 | 55 | 50 | 45 | 35 | / |
Properties | Product Data | Test Method | |||||
NE-0930 | NE-0940 | NE-0950 | NE-0960 | NE-0970 | NE-0980 | ||
Appearance | Transparent, no extraneous matter. | Visual Inspection | |||||
Density, g/cm3 | 1.06~1.10 | 1.09~1.15 | 1.12~1.18 | 1.14~1.20 | 1.17~1.23 | 1.18~1.25 | ASTM D792 |
Hardness, Shore A | 30±3 | 40±3 | 50±3 | 60±3 | 70±3 | 80±3 | ASTM D2240 |
Tensile Strength, MPa ≥ | 8.0 | 8.5 | 8.0 | ASTM D412 | |||
Elongation at Break, % ≥ | 700 | 600 | 500 | 400 | 300 | 200 | |
Tear Strength, Die C kN/m ≥ | 15 | 20 | 25 | 20 | ASTM D624 | ||
Resilience, % ≥ | 55 | 45 | 40 | 35 | / |
●Physical data in the above table is for reference only.
●Vulcanization condition: 120℃ *5 min
●Ratio of curing agent : platinum vulcanizator, (0.4~0.6)% added for component A, (0.8~2.5)% added for component B.
●The supplied test report is obtained by the Quality Inspection Department with the curing conditions and testing method of the company; due to the difference of curing conditions and testing method, we can't guarantee that both parties obtain the same testing result, and we suggest that users should use the test data obtained under their own testing conditions as the reference for service performance. All the above performance data and application recommendations are only a reference for use on the service performance of product, instead of a guarantee on the effectiveness or general applicability of our products under a certain application.
Send Inquiry :
Related Products :
MS-8131/8171
High-strength Silicone Rubber for Molding
MS-G121/G172
High Temperature Resistant Silicone Rubber
MS-631/681
Food Contact Silicone Rubber for Molding
MS-7125/7180
Common Silicone Rubber for Molding and Extrusion
MS-1440/1470
Antistatic Silicone Rubber
MS-10/9320
Ultra-low-hardness Silicone Rubber
MS-5140/5280
Economic Silicone Rubber for Molding and Extrusion
Products Category
Contact Us
Name: william
Tel: +8618002889642
Mobile: +8618002889642
E-mail: jay@liquidsilicone.net
Add: shenzhen, guangdong
Whatsapp: +8618002889642
Skype: wsrubber
Wechat: worldstrong
QQ: 407139139